Santamedical SM-1100S

Santamedical Generation 2 Fingertip Pulse Oximeter User Manual

Model: SM-1100S

1. Introduction

The Santamedical Generation 2 Fingertip Pulse Oximeter is designed for quick and precise measurement of pulse rates and blood oxygen saturation levels (SpO2). This device features a self-adjusting finger clamp and a simple one-button operation for ease of use. Its compact and portable design makes it suitable for use at home, during sports, and recreational activities.

2. Informations importantes sur la sécurité

  • This device is intended for sports and aviation use only and is not intended for medical use.
  • Readings may vary on darker skin pigmentation and can make oxygen levels appear higher than they may be. Please consult the manual for detailed information.
  • Les déclarations concernant les compléments alimentaires n’ont pas été évaluées par la FDA et ne sont pas destinées à diagnostiquer, traiter, guérir ou prévenir une maladie ou un problème de santé.

3. Contenu de la boîte

  • Santamedical Generation 2 Fingertip Pulse Oximeter
  • Neck/Wrist Lanyard
  • Manuel d'utilisation
  • 2 piles AAA
Contents of the Santamedical Generation 2 Fingertip Pulse Oximeter box, including the oximeter, lanyard, user manual, and batteries.

Image: Box contents of the Santamedical Generation 2 Fingertip Pulse Oximeter.

Video: An official product video demonstrating the unboxing and contents of the Santamedical SM-1100S Pulse Oximeter, including the device, batteries, lanyard, and user manual.

4. Installation

4.1 Installation de la batterie

  1. Ouvrez le couvercle du compartiment à piles situé à l'arrière de l'appareil.
  2. Insérez les deux piles AAA en veillant à respecter la polarité (+ et -) comme indiqué à l'intérieur du compartiment.
  3. Fermez soigneusement le couvercle du compartiment à piles.
Santamedical Generation 2 Fingertip Pulse Oximeter, showing the device where batteries would be inserted.

Image: The Santamedical Generation 2 Fingertip Pulse Oximeter, ready for battery installation.

5. Mode d'emploi

5.1 Prendre une mesure

  1. Ensure the device has fresh batteries installed.
  2. Ouvrir le clamp by gently pressing the button on the side.
  3. Insert one finger (preferably the index finger) into the rubber opening of the oximeter, ensuring the finger is placed correctly.
  4. Relâchez le clamp.
  5. Appuyez une fois sur le bouton d'alimentation pour allumer l'appareil.
  6. Keep your hand still. The SpO2 and Pulse Rate readings will display on the OLED screen within a few seconds.
A finger inserted into the Santamedical Generation 2 Fingertip Pulse Oximeter, showing the device in use.

Image: Proper finger placement for taking a measurement with the pulse oximeter.

5.2 Modes d'affichage

The device features a bright OLED display with 6 different display modes. Press the power button repeatedly to cycle through the available display orientations and formats. This allows for easy viewen l'observant sous différents angles.

Six different display modes of the Santamedical Fingertip Pulse Oximeter, showing various orientations and data presentations.

Image : Examples of the six display modes available on the device.

6. Tips for Accurate Readings

  • Nails should be clean and free of nail polish or artificial nails.
  • Ensure hands are warm before taking a reading.
  • Remain as still as possible during the measurement process.
  • Avoid taking readings in direct sunlight or strong artificial light.

Video: An official product video demonstrating the usage of the Santamedical SM-1100S Pulse Oximeter, including tips for accurate readings.

7. Entretien

  • Clean the device regularly with a soft cloth dampened with alcohol. Do not immerse the device in liquid.
  • Retirez les piles si l'appareil ne doit pas être utilisé pendant une période prolongée afin d'éviter toute fuite.
  • Conservez l'oxymètre dans un endroit frais et sec, à l'abri de la lumière directe du soleil et des températures extrêmes.

8. Dépannage

ProblèmeCause possibleSolution
Pas d'affichage après la mise sous tensionLes piles sont mortes ou mal installéesReplace batteries or re-install correctly
Lectures instablesFinger not inserted properly, movement, cold finger, nail polishRe-insert finger, remain still, warm hands, remove nail polish
"Finger out" messageFinger not detectedEnsure finger is fully inserted and resting on the sensor
Santamedical Generation 2 Fingertip Pulse Oximeter, showing the device's display and finger opening.

Image: The pulse oximeter, illustrating its display and finger placement area.

9. Spécifications

  • Numéro de modèle : SM-1100S
  • Dimensions du produit : 4.1 x 2.9 x 1.9 pouces; 3.53 onces
  • Plage de mesure : 30 - 255 bpm (Pulse Rate)
  • SpO2 Resolution: +/- 2%
  • Pulse Rate Resolution: +/- 2 bpm
  • Pouvoir: 2 piles AAA (incluses)
  • Autonomie de la batterie : 30+ hours of continuous monitoring
  • Afficher: Bright OLED display with 6 modes
  • Caractéristiques: Low battery level indicator, automatic power off after 10 seconds.
Gros plan view of the Santamedical Generation 2 Fingertip Pulse Oximeter's OLED display, showing SpO2 and Pulse Rate readings.

Image : détaillée view of the device's bright OLED display.

10. Garantie et assistance

Santamedical offers a no-hassle 1-year warranty for this product. For customer service and support, please refer to the contact information provided in the user manual included with your device or visit the official Santamedical website.

For additional information or to explore other Santamedical products, visit the Santamedical Store.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.