OSRAM SPC. LIN 1613

OSRAM Special LINESTRA S14d 35W 230V Opal Tubular Lamp Manuel d'instructions

Model: SPC. LIN 1613

1. Introduction

Thank you for choosing the OSRAM Special LINESTRA S14d 35W 230V Opal Tubular Lamp. This instruction manual provides important information for the safe and efficient use of your product. Please read this manual carefully before installation and retain it for future reference. This lamp is designed to provide beautiful, soft light, primarily for mirror lighting applications.

Informations importantes sur la sécurité : Always ensure the power supply is disconnected before installing or replacing the lamp. Use only in luminaires approved for this type of lamp. Ceci lamp is not shockproof and is not suitable for use in ovens or refrigerators.

2. Produit terminéview

OSRAM Special LINESTRA S14d 35W 230V Opal Tubular Lamp

Image 1: The OSRAM Special LINESTRA S14d 35W 230V Opal Tubular Lamp. This image shows the elongated, cylindrical shape of the lamp with its S14d base connector. The lamp features an opal finish for diffused light.

The OSRAM Special LINESTRA lamp is a tubular incandescent lamp with an S14d base. It is designed for specific lighting fixtures, often found in bathrooms or decorative applications where linear light sources are preferred. Its opal finish ensures a uniform and glare-free light distribution.

3. Installation et configuration

  1. La sécurité avant tout : Before attempting any installation, ensure the power supply to the fixture is completely switched off at the main circuit breaker.
  2. Vérifier la compatibilité : Verify that your lighting fixture is designed for an S14d base and can safely accommodate a 35W, 230V lamp. Refer to your fixture's manual for specifications.
  3. Déballez le Lamp: Retirez délicatement le lamp from its packaging. Handle the lamp by its base or ends to avoid touching the glass surface directly, as oils from your skin can reduce lamp vie.
  4. Insérez le Lamp: Align the S14d base pins with the corresponding slots in the lamp holder. Gently push and slide the lamp into place until it is securely seated. Do not force the lamp.
  5. Restaurer l'alimentation : Une fois le lamp is securely installed, restore power to the fixture at the main circuit breaker.
  6. Opération de test : Switch on the light to confirm proper installation and functionality.

Prudence: Ne pas dépasser la puissance maximaletage specified for your lighting fixture. Overloading can cause overheating and fire hazards.

4. Mode d'emploi

The OSRAM Special LINESTRA lamp operates like a standard incandescent bulb. Once installed in a compatible fixture and power is supplied, it will illuminate when the fixture's switch is turned on.

  • Allumer/éteindre : Use the wall switch or the switch integrated into your lighting fixture to turn the lamp allumé ou éteint.
  • Utilisation prévue : Ce lamp is primarily intended for indoor use, particularly for mirror lighting and other decorative applications where a linear light source is desired.

5. Entretien

  • Nettoyage: Assurez-vous que le lamp is cool and the power is off before cleaning. Wipe the lamp gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the lampsa surface ou ses composants internes.
  • Lamp Remplacement: Quand le lamp reaches the end of its life (average nominal lifetime is 1000 hours), it will cease to function. To replace it, follow the installation steps in Section 3, ensuring the power is off before removing the old lamp and installing a new one. Dispose of old lamps conformément à la réglementation locale.

6. Dépannage

ProblèmeCause possibleSolution
Lamp ne s'allume pas.
  • Pas d'alimentation à l'appareil.
  • Lamp mal assis.
  • Lamp a atteint sa fin de vie.
  • Faulty fixture switch or wiring.
  • Vérifiez le disjoncteur et l'interrupteur mural.
  • Assurez-vous lamp is securely inserted into the S14d base.
  • Remplacer le lamp avec un nouveau.
  • Consultez un électricien qualifié pour inspecter le luminaire.
Lamp scintille.
  • Connexion lâche.
  • Voltage fluctuations.
  • Lamp approchant de la fin de sa vie.
  • Turn off power, re-seat the lamp.
  • Assurer une alimentation électrique stable.
  • Remplacer le lamp.

Si les étapes de dépannage ne résolvent pas le problème, contactez le service client ou un électricien qualifié.

7. Spécifications

Numéro de modèle :SPC. LIN 1613
Marque:OSRAM
Lamp Taper:Special LINESTRA Tubular Incandescent Lamp
Consommation d'énergie :35 W
Voltage:230 V
Flux lumineux :240 XNUMX lm
Type de base :S14d
Finition:Opale
Average Nominal Lifetime:1000 h
Classe d'efficacité énergétique :G
Diamètre:30 mm
Longueur totale :300 mm
Bulb Dimensions (Diameter x Length):30 mm x 300 mm
Poids:30 g
Résistant aux chocs :Non
Suitable for Oven:Non
Suitable for Refrigerator:Non

8. Consignes de sécurité

  • Risque électrique : Always disconnect power before installing, removing, or cleaning the lamp.
  • Chaleur: Lampe à incandescenceamps generate heat. Do not touch the lamp when it is operating or immediately after it has been switched off. Allow it to cool down before handling.
  • Compatibilité des appareils : Utilisez ceci lamp only in fixtures specifically designed for S14d base tubular lamps and rated for the lampc'est quoitage et voltage.
  • Rupture: Ce lamp is not shockproof. Handle with care to prevent breakage. If the lamp breaks, carefully clean up glass fragments.
  • Élimination: Jeter les l usagésamps according to local environmental regulations.

9. Garantie et assistance

For warranty information or technical support, please refer to the official OSRAM webConsultez le site ou contactez votre détaillant. Conservez votre reçu d'achat comme preuve d'achat.

Visit OSRAM Official Website

© 2023 OSRAM. All rights reserved. Information subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.