1. Introduction
The Rane RS-1 is a dedicated external power supply designed to provide reliable 120VAC power to a range of compatible Rane audio products. This manual provides essential information for the safe and correct setup, operation, and maintenance of your RS-1 power supply.
Please read this manual thoroughly before using the product to ensure proper function and to prevent damage to the unit or connected equipment.
2. Consignes de sécurité
- Source d'alimentation : Connect the RS-1 only to a 120VAC, 60Hz power outlet. Ensure the outlet is properly grounded.
- Ventilation: Do not block any ventilation openings. Ensure adequate airflow around the power supply.
- Humidité: Do not expose the unit to rain, moisture, or excessive humidity. Keep liquids away from the power supply.
- Chaleur: Évitez de placer l'appareil à proximité de sources de chaleur telles que des radiateurs, des bouches de chauffage, des poêles ou autres appareils produisant de la chaleur.
- câbles: Protégez le cordon d’alimentation pour éviter qu’il ne soit piétiné ou pincé, en particulier au niveau des fiches, des prises de courant et du point de sortie de l’appareil.
- Entretien: N'essayez pas de réparer vous-même ce produit. Confiez tous les travaux d'entretien à du personnel de service qualifié.
- Coupure: Unplug the power supply from the wall outlet during lightning storms or when unused for long periods.
3. Installation
Follow these steps to correctly set up your Rane RS-1 Power Supply:
- Identifier l'appareil compatible : Ensure your Rane audio product requires the RS-1 power supply and has the appropriate RJ-45 style power input port.
- Connectez-vous à l'appareil : Carefully insert the RJ-45 style connector from the RS-1 power supply into the designated power input port on your Rane audio device. Ensure a secure connection.
- Connectez-vous à une prise de courant : Plug the two-prong AC power cord of the RS-1 into a standard 120VAC, 60Hz wall outlet.
- Mise sous tension : Once connected, your Rane audio device should receive power. Refer to your Rane audio device's manual for specific power-on procedures.
Image: Rane RS-1 Power Supply. This image displays the Rane RS-1 Power Supply, a black rectangular unit with an attached power cord featuring a two-prong North American plug on one end and an RJ-45 style connector on the other, designed to provide power to compatible Rane audio equipment.
4. Mode d'emploi
The Rane RS-1 is an external power supply that operates automatically once connected to a power source and a compatible Rane device. It does not have user-adjustable controls.
- Ensure all connections are firm before applying power.
- The power supply is designed for continuous operation within its specified voltage et quoitage limites.
- Always disconnect the power supply from the wall outlet before disconnecting it from the Rane audio device, especially if the device does not have its own power switch.
5. Entretien
The Rane RS-1 Power Supply requires minimal maintenance. Follow these guidelines to ensure longevity:
- Nettoyage: Disconnect the power supply from the wall outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosol sprays.
- Inspection: Periodically inspect the power cord and connectors for any signs of damage, fraying, or loose connections. If damage is observed, discontinue use and seek professional servicing.
- Stockage: Lorsqu'elle n'est pas utilisée pendant une période prolongée, rangez le bloc d'alimentation dans un endroit frais et sec, à l'abri de la lumière directe du soleil et des températures extrêmes.
6. Dépannage
If you encounter issues with your Rane RS-1 Power Supply, refer to the following common troubleshooting steps:
| Problème | Cause possible | Solution |
|---|---|---|
| No power to connected Rane device. |
|
|
| Alimentation électrique intermittente. |
|
|
If these steps do not resolve the issue, contact Rane customer support or a qualified service technician.
7. Spécifications
| Modèle | RS1 |
| Marque | Rane |
| Vol d'entréetage | 120 Volts AC |
| Source d'énergie | AC |
| Quoitage | 1000 watts |
| Power Plug Type de | Type A - 2 broches (Amérique du Nord) |
| Poids de l'article | 1.3 livres (0.59 kg) |
| Dimensions | (Non spécifié dans les données) |
| Code UPC | 687499101045 |
| ASIN | B0002IU02S |
8. Compatible Rane Devices
The Rane RS-1 Power Supply is compatible with the following Rane audio products:
- AC 22B
- AC 23B
- AD 22d
- AP 13
- AVA 22d
- CP 52
- CP 64
- DA 216a
- DA 26
- DC 24
- DMS 22
- GE 130
- GE 215
- GE 30
- HC 4
- HC 6
- MLM42
- MLM 82a
- MM 8z
- MP 2
- MP 22z
- MP 24z
- MP 2016
- MS 1b
- PE 17
- PS 1
- RA 30
- SM 26B
- SM 82
- SRM 66
- SSE 35
- Merci 22
- Merci 44
- TTM 54i
- MTT 56
- VP 12
9. Garantie et assistance
For information regarding warranty coverage, product registration, or technical support, please refer to the official Rane website or contact Rane customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
Rane Official Website: www.rane.com