Manuel d'utilisation de la montre chronographe automatique Raymond Weil 4875-STC-00209

1. Introduction

Thank you for choosing a Raymond Weil timepiece. This manual provides essential information for the proper setup, operation, and maintenance of your Raymond Weil 4875-STC-00209 automatic chronograph watch. Please read these instructions carefully to ensure optimal performance and longevity of your watch.

2. Produit terminéview

The Raymond Weil 4875-STC-00209 is an elegant automatic chronograph watch featuring a stainless steel case, a black dial with Roman numerals, and a brown leather strap. It includes a chronograph function and a calendar display at the 12 o'clock position. The watch is equipped with a curved sapphire crystal for enhanced durability and a transparent caseback that showcases its intricate automatic movement.

Figure 1 : Face avant view of the Raymond Weil 4875-STC-00209 watch. This image displays the watch's black dial with Roman numeral hour markers, three chronograph sub-dials, and the date window at 12 o'clock. The watch is fitted with a brown leather strap.

Figure 2 : Arrière view of the Raymond Weil 4875-STC-00209 watch. This image highlights the transparent caseback, allowing visibility of the automatic mechanical movement. The brown leather strap with its buckle is also visible.

3. Installation

3.1. Enroulement initial

Your Raymond Weil 4875-STC-00209 is an automatic watch, meaning it is powered by the motion of your wrist. However, for initial setup or if the watch has stopped due to lack of wear, it requires manual winding:

1. Ensure the crown (located on the side of the watch) is in its normal, pushed-in position.
2. Tournez la couronne dans le sens horaire environ 20 à 30 fois. Cela fournira une réserve de marche suffisante pour démarrer la montre.
3. Une fois portée, le mouvement naturel de votre bras maintiendra la montre remontée.

3.2. Réglage de l'heure

Pour régler l'heure sur votre montre :

1. Pull the crown out to the outermost position (position 3). The seconds hand will stop.
2. Tournez la couronne dans le sens horaire ou antihoraire pour régler les aiguilles des heures et des minutes à l'heure souhaitée.
3. Push the crown back into its normal position (position 1) to restart the watch.

3.3. Fixer la date

Pour régler la date:

1. Tirez la couronne vers l'extérieur jusqu'à la position médiane (position 2).
2. Turn the crown clockwise to advance the date. Avoid setting the date between 9 PM and 3 AM, as this is when the date change mechanism is engaged and could cause damage.
3. Once the correct date is displayed, push the crown back into its normal position (position 1).

4. Utilisation du chronographe

Your watch features a chronograph function for measuring elapsed time. It is operated by two pushers located on the side of the case, typically above and below the crown.

1. Commencer: Press the top pusher to start the chronograph. The central chronograph seconds hand will begin to move.
2. Stop: Press the top pusher again to stop the chronograph. The elapsed time will be indicated by the central chronograph seconds hand and the chronograph sub-dials (typically for minutes and hours).
3. Remise à zéro: Après avoir arrêté le chronographe, appuyez sur le poussoir inférieur pour remettre toutes les aiguilles du chronographe à leur position zéro.

Note: Avoid operating the chronograph pushers underwater to prevent water ingress.

5. Entretien

5.1. Résistance à l'eau

Your Raymond Weil 4875-STC-00209 watch has a water resistance rating of 30 meters (100 feet). This rating means the watch is suitable for everyday use and can withstand splashes or brief immersion in water. It is pas Convient pour la natation, la douche ou la plongée. Assurez-vous toujours que la couronne est bien enfoncée avant tout contact avec l'eau.

5.2. Nettoyage

Pour préserver l'apparence de votre montre :

• Essuyez le boîtier et le verre avec un chiffon doux et sec.
• Pour le bracelet en cuir, évitez toute exposition prolongée à l'eau, à la lumière directe du soleil et aux produits chimiques agressifs afin de prévenir les dommages et la décoloration.

5.3. Stockage

When not wearing your watch for an extended period, store it in a cool, dry place, away from direct sunlight and strong magnetic fields, which can affect the accuracy of the automatic movement.

6. Dépannage

If you encounter issues with your watch, consider the following:

• Montre non fonctionnelle : Ensure the watch is sufficiently wound. If it has been stationary, manually wind it as described in Section 3.1.
• Heure inexacte : Exposure to strong magnetic fields can affect accuracy. If you suspect this, consult an authorized service center.
• Date inchangée : Check if the date is being set during the prohibited hours (9 PM - 3 AM). Adjust the time past 3 AM before setting the date.

For persistent issues, please contact an authorized Raymond Weil service center.

7. Spécifications

8. Garantie et assistance

Your Raymond Weil watch is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms, registration, and to locate an authorized service center, please refer to the official Raymond Weil website or the warranty card included with your purchase. For any support inquiries, it is recommended to contact Raymond Weil customer service directly.