Intermatic Digital 7-Day Programmable Wall Switch Timer SS7C User Manual

Introduction

The Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer is designed to control lighting and heavy-duty loads such as fans and appliances. This timer offers precise control with up to six ON/OFF settings per day, totaling 42 settings per week. It features a digital clock, battery backup, and various programming options to suit your schedule.

Consignes de sécurité

AVERTISSEMENT: Risk of electric shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing. If you are unsure about any part of these instructions, consult a qualified electrician. Do not exceed the electrical ratings of the device.

• Assurez-vous que l’alimentation est coupée avant l’installation.
• Respectez tous les codes électriques locaux et nationaux.
• Cet appareil est destiné à un usage intérieur uniquement.

Contenu du colis

Vérifiez que tous les composants sont présents avant de commencer l'installation :

• Intermatic SS7C Digital Wall Switch Timer Unit
• Vis de montage
• Écrous de fil
• Manuel d'instructions (ce document)

Configuration et installation

Outils requis : Screwdriver, Wire Strippers, Electrical Tape.

1. Couper l'alimentation : Locate the circuit breaker or fuse that controls the power to the switch you are replacing. Turn it OFF. Verify power is off using a voltage testeur.
2. Supprimer le commutateur existant : Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch. Note the wiring configuration (e.g., line, load, ground).
3. Wire the SS7C Timer: Connect the wires from the wall box to the SS7C timer using the provided wire nuts. Refer to the wiring diagram below for typical connections. Ensure all connections are secure.
   

   Image : Avant view of the Intermatic SS7C Digital Wall Switch Timer. This image shows the digital display and control buttons, which are essential for programming and operation.

   • Fil de ligne : Connect to the timer's LINE terminal.
   • Câble de charge : Connect to the timer's LOAD terminal.
   • Fil de terre: Connect to the timer's GROUND terminal.
   • Neutral Wire (if applicable): Some installations may require a neutral wire. Consult your local electrical codes.
4. Monter le minuteur : Gently push the wired timer into the wall box. Secure it with the mounting screws. Attach the wall plate.
5. Restaurer l'alimentation : Turn the power back ON at the circuit breaker or fuse box. The timer display should illuminate.

Fonctionnement et programmation

The SS7C timer allows for flexible programming with up to 6 ON/OFF settings per day.

1. Réglage de l'heure et de la date actuelles

1. Appuyez sur le HORLOGE bouton. L'affichage de l'heure clignotera.
2. Utilisez le HEURE et MINUTE boutons pour régler l'heure actuelle.
3. Appuyez sur le JOUR bouton pour régler le jour actuel de la semaine.
4. Presse HORLOGE again to save and exit, or wait a few seconds for it to save automatically.

2. Programmation des événements ON/OFF

The timer supports up to 6 ON/OFF programs per day, for a total of 42 per week.

1. Appuyez sur le PROGRAMME bouton. L'écran affichera « 1 ON ».
2. Utiliser HEURE, MINUTE, et JOUR buttons to set the desired ON time and day(s) for Program 1. You can select specific days (e.g., M, Tu, W, Th, F, Sa, Su), weekdays (M-F), weekends (Sa-Su), or all 7 days.
3. Presse PROGRAMME À nouveau. L'écran affichera « 1 OFF ».
4. Set the desired OFF time and day(s) for Program 1 using the HEURE, MINUTE, et JOUR boutons.
5. Répétez les étapes 1 à 4 pour les programmes supplémentaires (de 2 ON/OFF à 6 ON/OFF).
6. Après avoir configuré tous les programmes souhaités, appuyez sur HORLOGE pour revenir au fonctionnement normal.

3. Commande manuelle

To manually turn the connected device ON or OFF outside of programmed times, press the MARCHE/ARRÊT button. This will temporarily override the current program until the next scheduled ON or OFF event.

4. Random Setting Feature

The random setting feature can be activated to vary ON/OFF times slightly, creating a lived-in appearance when you are away. Consult the full manual for specific activation steps for the random feature.

Entretien

The Intermatic SS7C timer is designed for low maintenance. The internal battery backup maintains programming for up to three years, even during power failures.

• Remplacement de la batterie : If the display becomes dim or programming is lost frequently during power outages, the internal battery may need replacement. This typically requires professional servicing or careful adherence to specific instructions not detailed here.
• Nettoyage: Clean the timer's surface with a soft, damp chiffon. N'utilisez pas de nettoyants abrasifs ou de solvants.

Dépannage

Caractéristiques

• Marque: Intermatique
• Numéro de modèle : SS7C
• Poids de l'article : 0.35 livres
• Nombre de paramètres : 7-day programmable, up to 6 ON/OFF settings per day (42 per week)
• Taille de l'écran : 1.5 pouces
• Couleur: Blanc
• Fabricant: INTERMATIC INC
• Code à barres : 078275056732
• ASIN: B0000BYDA2

Garantie et assistance

This Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer comes with a Garantie limitée du fabricant d'un an à compter de la date d'achat. Cette garantie couvre les défauts de matériaux et de fabrication dans des conditions normales d'utilisation.

For warranty claims, technical assistance, or further support, please contact Intermatic customer service. Keep your proof of purchase for warranty validation.

For the most up-to-date support information, please visit the official Intermatic website ou consultez les coordonnées fournies avec l'emballage de votre produit.